Coverage Simulation
Validate designs before installation
Run simulations to test coverage for movement paths and observation tasks.
Benefit
Find weak points in the design before they become site problems.
How it works
Define pedestrian or vehicle paths and run a simulation to see where coverage is continuous, where cameras overlap, and where visibility drops below the required DORI level.
Typical user
Consultants and enterprise teams validating design assumptions.
Example use case
A pedestrian path from the lobby to the server room is traced; the simulation reveals a short gap that is closed by adjusting one camera direction.
Key inputs
- Camera configuration
- Movement paths
- Simulation parameters
Key outputs
- Path coverage traces
- Visibility statistics
- Design adjustment recommendations
Technical note
Simulation is a planning aid based on model inputs. It does not replace commissioning tests or real-world performance verification.
Technical resources
